hi everyone I'm new to this site so I'm unsure if this is where I can ask questions but I will give it a try
I'm in the process of doing a restomond 1973 429 Mach 1 most things I'm good on after building my 67 but the 73 has a rear demister but the interior wasn't in it when I got it from the states as they were building it as a drag car I can not locate the switch for it and have no idea where it would be mounted and what plug goes to it
I'm hoping someone can help me with this
thanks heaps Phil
1973 mach 1 - posted on behalf of "piffle"
Moderator: Moderators
-
- Baby Mustang
- Posts: 4
- Joined: Tue May 22, 2018 8:54 pm
Re: 1973 mach 1 - posted on behalf of "piffle"
Maybe try the 71-73 Mustang site?
Don from Ohio Mustang Supplies and Mike from Motorcity Mustangs I think would definetly have the switch you are chasing. Also they are both big Stang fans and I'm sure if they can't supply a picture of where it goes there would definitely be someone who could.
Also there are links to wiring diagrams on the wiki section of the site - very helpful.
Shane
Don from Ohio Mustang Supplies and Mike from Motorcity Mustangs I think would definetly have the switch you are chasing. Also they are both big Stang fans and I'm sure if they can't supply a picture of where it goes there would definitely be someone who could.
Also there are links to wiring diagrams on the wiki section of the site - very helpful.
Shane
73 Mach 1