Mustang Tech

New floor section welded in and seam sealed. Now i need to clean up and refit the seat riser and wait till i get the new "rear floor to shock support to boot" section from the US along with the rest of the parts i need. http://i277.photobucket.com/albums/kk48/chatscott/67%20convertible/flo...

14-07-10 left and right rear torque boxes are now repaired and all the chassis rails except the front and under floor reinforcement pan have been sandblasted and primed http://i277.photobucket.com/albums/kk48/chatscott/67%20convertible/floor/IMGP6333.jpg~original http://i277.photobucket.com/albums/k...

The back section I decided to do a little “Tutorial” :pop: for those who havent done this sort of stuff and wanted to have a crack. I forgot to get a pic of it cut out :banghead: but you can see the section in another pic where I have decided to bend up and plug weld in a extra reinforcement behind ...

11-07-10 Got the repairs on the RH inner rail done today , but still need to rebuild the rear torque box area. The LH side is in good nic so will be good once cleaned up with a sand blast. The rail has rusted from the outside in , between the floor and rail so the inside was good and I got away with...

Meanwhile because I have the new LHR ¼ , I have cut of the old one that had been badly damaged and bogged up. And just test fitted the new to readjust the door gap , will need to clean up the frame and patch inner wheel arch before welding panel permanetly. http://i277.photobucket.com/albums/kk48/ch...

I have now removed the seat riser and 90% of the floor , cleaned out the rails and treated. I will have to repair or replace the rh inner sill rail and rebuild the rear torque boxes . http://i277.photobucket.com/albums/kk48/chatscott/67%20convertible/floor/IMGP6171.jpg~original http://i277.photobuck...

So after an assessment of the body and chassis, and a list of parts needed I was able to get stuck into it while the fastback is waiting for the temp to rise so I can do some painting. 1st of all I made up a Jig to keep it in shape while the floor is cut out . I dragged out a HQ holden chassis I had...

Plans are not a restomod as the fastback, but something a little different . RHD conversion again with std suspension and disc brakes , not going factory colour at this stage. I thought the original colour was the browny red as in the pics above but now have discovered it was lime gold with white/pa...

09-07-10 This is the new addition to the stable , 67 c code vert I took delivery of last week from Melbourne loaded with parts for my 66 fastback from BLKPNY . I viewed alot of pics that Steph sent me and on arrival there was no surprises as far as rust goes . This will be a back to back build of my...