Mustang Tech

Small Update , My 68 Gets some new wheels -17 inch 7's and 8's

Thanks John,

No I wont be doing much tinkering (Specially not with the Carb) now its been sorted on a Dyno, only thing I will be doing is getting some better wheels and tyres , then collecting more bits for a Disc Brake conversion. ?

Hi All , quick update to any interested , Its official ...Another Mustang finally Registered and going !

Realised when I presented my purchase receipt to the ACT shopfront its been hiding in my garage for 4 years ?,where does the time go ?

Checked the timing mark from scratch , did the whole, Put it on TDC on number one and it lined up so that excessive advance we found was probably real as well ? Not driving it yet ..Still with the mechanic , figured since it was already out there I would get some other stuff fixed . It just came bac...

Hi Jacko , Yes all sorted and then some - tried to sort it myself for a good while but just got worse .eventually it was either send it to the classifieds or my local Mechanic . Went with the latter... Carb was apparently over fueling the motor to the point where it had fouled all the plugs & co...

Thanks to all who replied , It seems that in my case at least just removing the switch , checking it's not stuck then putting it back in the block reset things . I now have working brakes and the Warning light has gone out. One step closer to Rego ?

Thanks Guys, Will give it a try , I did actually take the switch out to check it was not stuck not long after posting . It did seem to be OK after that so maybe it did centre itself ? The bugger is now it seems I have sprung a leak at the rear T-Piece and I have to start all over again bleeding the ...

Hi There , Finally doing some more work on 68 Coupe towards getting it ready for Rego . Replaced all the brakes ,Master cylinder and hoses but still have the Brake warning light staying On . I have read it's probably a an off centre or stuck piston in the Brake Balancer . Question : Is there any eas...

Nice one... it's all those fiddly bits that take all the time. You said it , and as fast as I fix something I find another little job that needs doing . e.g spent a few hours just tracing wiring to work out why the drivers door interior light switch didn't work. Current remaining jobs are : C4 Sele...

All , Its been 12 months since I added to this one so here is a current status . I have been slowly tiding up my car while hoping to eventually reach a point where its road worthy enough to get registered. I have been fixing countless little bodgey mechanical and electric bits that and although it m...

Hey Guys,

Anyone know why this one doesn't have a paint code ?
goes from 65C for coupe then seems to go straight to the trim code?

Hi ,

Thanks for the offer but I would be happy to just get the old one deleted
if that's an option.

Hi Guys, Dave here (Previously Member "Dave66Coupe") Just thought I would post up the car that replaced my 66 Coupe project car and as suggested by some my previous user name no longer matched the later model therefore I decided to change that too . The Specs are 68 C code coupe 289 , C4 a...