Mustang Tech

I logged in OK and found this thread

Damn. SRS forged are cheap. Try to get a trade account with Precision Intl. Their prices are pretty good with the discount Yeah this was never meant to be what it turned out to be. It was just going to be a mild cruiser you know? I think the blower missed the memo. Mild cruiser. No such thing. The ...

Dural automotive does do special pink slips for historic. Wink.
I forgot to mention, ANSMA don't require you to attend club meetings, go on runs or do any clubby things. Pay your money, get your number and wait 12 months.

Damn.
SRS forged are cheap.
Try to get a trade account with Precision Intl. Their prices are pretty good with the discount

https://ansma.com.au/ will let you join on line and they are hysterical rego compliant.
https://duralauto.com/ will pink slip it for you

Now you need a white one to make the tri bar set.

I'm not smart enough to work that out. Only way I enrich mine is push the gas pedal harder.

I have a Holley Sniper and set them 1st on at 185, off at 180 2nd on a 195 off at 185. Although I had a blocked radiator it seemed to do the job and kept the temps about 180-ish. I played around a fair bit chasing a collapsed lower hose. When the rebuilt lump and new radiator go in over Christmas I'...

What are the upper and lower voltages you're planning to use at the LEDs themselves? If your upper level is 5v or lower, you could just use a 5v voltage regulator, then adjust your resistors to get the voltages down to where you need them from there. I'm looking at using 13.9 or 14V as maximum inpu...

So, let me try to explain. I'm building this from scratch (because I can, I want to and I will) so I have to build the entire thing from scratch. As Hybrid says, I can run 2 circuits but I don't want to and my research indicates I don't need to. The LED I want to use are ~2.2 forward volts each, so ...

The bulbs were supplied and are a higher wattage than normal. I can't recall the exact numbers but they are brighter in the stop circuit than the 'normal' ones. It's only the centre bulb that is the issue but that sits a bit closer to the lens in the one I have (which I think is the Scott Drake vers...

I am doing the same thong for my 70. I don't want sequential and only want LED for the brightness so the peckerheads on their phones can see me braking. I have the 3 bulb setup already, but they have already rated to melt the middle lens. Perhaps an LED bulb will reduce this due to lower heat? So I ...

I reckon that's the only way to buy them - totally original.
And really, they would have been crushed? That's crazy

I bought a 100 amp from Rocket for $150. So far so good, limited running but powers Sniper, MSD and a 1500W amp without drama. Pumps out a constant 14v above idle and around 13.9 at ~750 rpm

Beat me to it. Similar pricing on the VB to silverfox.

Plan A is back on...

crap. Whats plan B?
I have just found a rebuildable AOD box...