.hi, guys,
I'm looking for some measurements so I can re weld the new front radiator support and the battery tray inner guard,
And yes I'm aware I should have taken measurements prior to destroying the old ones.
Can I please get the entire length from inner guard to inner guard, along the radiator and one front centre of radiator support to either side please..
66/65 measurements please
Moderator: Moderators
66/65 measurements please
66 basket case
Re: 66/65 measurements please
Really, no one has a 65/66 mustang and a tape measure. It would take 5 minutes to measure from the hood latch hole to either side.
I know the battery side inner fender is wider, but by how much?
66 basket case
Re: 66/65 measurements please
Inner skirt to inner skirt 106cm.
LH skirt to center 51cm.
LH skirt to center 51cm.
Re: 66/65 measurements please
Thanks Nassi, much appreciated..it is out by a poofteenth but a lot better than it was.
Again thanx..
66 basket case
Re: 66/65 measurements please
I would have measured for you, but my rad support is modified, and didn't want to screw you over.