For all of us that install a lot of diffs.
Been meaning to make this for years & finally got the chance last week. Had my machinist (tool & die maker) neighbour turn me up the shaft that fits into the floor jack, but you could make it bolt onto the pad if your jack does not come apart like mine.
Material, 100mm X 8mm flat bar. 1 of 600mm, 3 of 150mm (2 have 50mm radius cut in one end) & 1 of 100mm (with a 40mm radius cut in one end.
If you are bolting to the jack pad plate, you will need some spacer material between the bottom of the pad plate & the flat bar.
Weekend project ......
Moderator: Moderators
Weekend project ......
Last edited by ozbilt on Sun Sep 27, 2015 12:21 am, edited 1 time in total.
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet
Re: Weekend project ......
That is a great idea! I lifted mine into the car on my own. Didn't do the body a whole lot of good.
Re: Weekend project ......
Excellent piece of kit. Us old fellas need all the help we can get and it sure beats the balancing act I have had to perform in the past.
I did a similar attachment for fitting the doors to the effie.
I did a similar attachment for fitting the doors to the effie.
-
- Mustang King
- Posts: 2531
- Joined: Wed Jul 28, 2010 6:52 pm
- Contact:
Re: Weekend project ......
Love your work Kerry....as always.
Cheers,
Ash
Cheers,
Ash
Cheers.
Medic
(Always work smarter not harder!!!)
67 C Code coupe
Medic
(Always work smarter not harder!!!)
67 C Code coupe
Re: Weekend project ......
Now that is handy.
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Weekend project ......
Nice. I made one up a while ago to do the toploader Mounts the same way on the trolly jack. To bloody heavy and awkward by myself. Easy as with it. Might have to make a diff one up now!!
Re: Weekend project ......
I already have a transmission jack, works well with the 2 post hoist, ask gbx78 & DD289 ......69candy wrote:Nice. I made one up a while ago to do the toploader Mounts the same way on the trolly jack. To bloody heavy and awkward by myself. Easy as with it. Might have to make a diff one up now!!
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet