67 FG Resto Mod
Moderator: Moderators
Re: 67 FG Resto Mod
Not a lot of progress this weekend, had to go to Brisbane. I managed to get some undercoat and two-pack on the control arms. Did a quick "test fit' pretty sure I need to cut a bit more off the flange for the upper control arm.
Not a lot will be happening in the next few weeks, booked up with work and moving my daughter.
Cheers Roger
Not a lot will be happening in the next few weeks, booked up with work and moving my daughter.
Cheers Roger
Re: 67 FG Resto Mod
Need a bit of help.
It was suggested I look in the photo bucket for some info.
Not sure how to do it.
Any help appreciated.
Roger?
It was suggested I look in the photo bucket for some info.
Not sure how to do it.
Any help appreciated.
Roger?
Re: 67 FG Resto Mod
Who suggested that? Kerry? I think there's a link to his photobucket in his profile.
Re: 67 FG Resto Mod
Got it, thanks guys
Re: 67 FG Resto Mod
I saw Roger's post and sent him the link in a PM ......hybrid wrote:Who suggested that? Kerry? I think there's a link to his photobucket in his profile.
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet
Re: 67 FG Resto Mod
Need to take a bit more off the flange, rather do it now than have to do it later.
Cut out and welded flange. Test fit upper control arm
Fitted the rest of the left hand side, looks good.
Not planning on using these brakes, using the FG brakes, 322 rotors and callipers
Back to work tomorrow.
Cheers
Roger
Cut out and welded flange. Test fit upper control arm
Fitted the rest of the left hand side, looks good.
Not planning on using these brakes, using the FG brakes, 322 rotors and callipers
Back to work tomorrow.
Cheers
Roger
Re: 67 FG Resto Mod
Shock is upside down. Looks like the front end fitted up easily.
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet
Re: 67 FG Resto Mod
They do that in Queensland Oz!
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: 67 FG Resto Mod
Your right Kerry, this is the way the shockies are mounted. The front end did fit up nicely, the tolerance's are quite tight, so very happy.
Roger
Roger
Re: 67 FG Resto Mod
After a couple of trips to Brisbane and moving the daughter into a new apartment I finally had a chance to get back to this project.
First job was to pull the motor from the donna car, so I can do a test fit in the Mustang.
Has been an 'eye-opener' working on these newer cars, removing K frame, motor and transmission.
Here's a few pictures
removed radiator, aircon, ps cooler
Removed all wiring and hoses etc., K frame, then dropped the motor. Had to lift the body to clear the motor.
Motor out
different angles
Does anyone know how they lift these motors with an engine hoist, or which mounting points they use.
thanks
Roger
First job was to pull the motor from the donna car, so I can do a test fit in the Mustang.
Has been an 'eye-opener' working on these newer cars, removing K frame, motor and transmission.
Here's a few pictures
removed radiator, aircon, ps cooler
Removed all wiring and hoses etc., K frame, then dropped the motor. Had to lift the body to clear the motor.
Motor out
different angles
Does anyone know how they lift these motors with an engine hoist, or which mounting points they use.
thanks
Roger
Re: 67 FG Resto Mod
Looks fantastic!
What are you doing with the FG Shell? I'm guessing it's a stat write off? Would you sell any cuts off it?
What are you doing with the FG Shell? I'm guessing it's a stat write off? Would you sell any cuts off it?
1966 Ford Mustang Coupe... [Build in progress]
Re: 67 FG Resto Mod
Shaye93, It is a stat write off, which parts are you after.Shayne93 wrote:Looks fantastic!
What are you doing with the FG Shell? I'm guessing it's a stat write off? Would you sell any cuts off it?
-
- Mustang Star
- Posts: 343
- Joined: Thu Jan 03, 2013 3:44 am
Re: 67 FG Resto Mod
Looks good!