rear wheel bearings

Technical Discussion on Pre-1973 Mustangs

Moderator: Moderators

Post Reply
123abc
Mustang Star
Mustang Star
Posts: 581
Joined: Fri Jul 29, 2011 9:55 pm
Contact:

rear wheel bearings

Post by 123abc »

in the next week im sending my center off to be done so while its away I will do my wheel bearings can anyone tell me what bearings will fit a lsd 9 inch 28 spline axle as ive heard there is 2 sizes
Last edited by 123abc on Mon Jul 16, 2018 7:24 am, edited 1 time in total.
lukep6470
Mustang Star
Mustang Star
Posts: 600
Joined: Mon Jan 06, 2014 9:13 pm

Re: rear wheel bearings

Post by lukep6470 »

Hmm,

There is big and small bearing housings. The small bearing 9" is the same size as the 8" if that helps. I know in the 67 the 28 spline 9" was a small bearing housing.

Maybe this will help:

http://boyerfour.com/mustang/rear/small ... rd_8_9.htm
Charbel
Junior Mustang
Junior Mustang
Posts: 37
Joined: Thu Oct 19, 2017 11:44 pm

Re: rear wheel bearings

Post by Charbel »

If it's a factory differential it will have a small bearing housing.

Bolt top to bottom are 2"s apart and 3-3/8" side to side. Can't think of a Stang that I have come across with factory big bearing ends. From memory the big bearing end guys go to 31+ spline axles.

Charbel
C&M Engineering
Post Reply