Brake pipe flaring tool recommendations to buy
Moderator: Moderators
Brake pipe flaring tool recommendations to buy
Decent tool that works, will last.
Re: Brake pipe flaring tool recommendations to buy
This is the style of tool I have been using for 15 years.
https://www.ebay.com.au/itm/Trade-Grade ... 0506.m3226
https://www.ebay.com.au/itm/Trade-Grade ... 0506.m3226
Re: Brake pipe flaring tool recommendations to buy
Yep the one Nassi suggest is a good tool.
Re: Brake pipe flaring tool recommendations to buy
You can also buy a 37* flare attachement for that style of tool which is good for AN flares
C&M Engineering
Re: Brake pipe flaring tool recommendations to buy
Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
Re: Brake pipe flaring tool recommendations to buy
It will work fine, just make sure the cut is square.smh00n wrote:Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
Re: Brake pipe flaring tool recommendations to buy
And dont have the pipe in the collet too tight, let stick out then use the flat tool on the rotary bit to push it back the tighten the collets up, then flare it.nassi wrote:It will work fine, just make sure the cut is square.smh00n wrote:Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
Re: Brake pipe flaring tool recommendations to buy
Roger that x 2