Jacko's Project
Moderator: Moderators
Re: Jacko's Project
Maybe that's why they called then Hold On's.
Re: Jacko's Project
You have not met some of the Mustangs I have......hybrid wrote:A Mustang would never do that.
Re: Jacko's Project
30 May 2018
Wow, this is feeling strangely familiar- an update on a Sunday.
Well, this week I set about changing the ticking lifter. I had a new inlet gasket and a couple of lifters on the condition I return the stuffed lifters back to the shop as they have not had one for a long while. They also suggested checking for a dodgy valve stem seal as, again, they rarely have stuffed lifters.
Before launching into the job, the shop advice was haunting me. One more check with the stethoscope listening/divining thing. I really wanted to hear a difference but could not even convince myself there was one in the valve train. Next step was the dizzy shaft but nothing. What could this ‘rounded’ (as opposed to a sharp) ticking be?
More listening and I think I had it but I needed better ears to confirm. Enter JBB.
‘Ears BB’ as he will be called in this updated, arrived with his lobes, of the ear sort.
“Stethoscope” he called as if I had turned into his engine bay nurse.
Stethoscope provided and there was darting, stopping and head shaking with a frown as he moved the probe around various attenuation points on the engine.
‘F&^%’ I think, head shaking and a frown can’t be good.
Stethoscope removed with the opinion,
“I can’t hear a difference, both side sounds the same.”
Well, that was good and bad news. If it is not the lifters then what?
I provided the LED light as Ears BB moved, hovered, stopped, shuffled and then darted around the engine bay.
“Seems to be coming from the back” (cylinder 7 area) he observed.
Yep, that was where I thought I heard it first before it started moving around the passenger side of the bay.
“What about a blown exhaust gasket” I offer
Ears BB then spots some soot on the head bolt under No 7 exhaust port. Yep, our ticking noise was actually a sharp chuffing from a blown exhaust gasket. Header removed and here is the proof:
It looks like the whole gasket was starting to separate.
Now, this should be a simple fix but… It turns out the PO had ported the heads to a dimension better suited to stormwater plumbing. In chev terms, these are pretty bloody big (47mm tall x 37mm wide)!
Lifters and gasket returned to the shop with the tale. They only had a gasket that was 40mm x 35mm. Off on a gasket hunt I go. I eventually found one that was slightly smaller but has the ‘lip’ around the inner rim.
New gasket installed with the assistance of permatex extreme temp sealant/gasket stuff (copper coloured). Left it for the advised period and then started it up. Ticking noise is gone!
Wow, this is feeling strangely familiar- an update on a Sunday.
Well, this week I set about changing the ticking lifter. I had a new inlet gasket and a couple of lifters on the condition I return the stuffed lifters back to the shop as they have not had one for a long while. They also suggested checking for a dodgy valve stem seal as, again, they rarely have stuffed lifters.
Before launching into the job, the shop advice was haunting me. One more check with the stethoscope listening/divining thing. I really wanted to hear a difference but could not even convince myself there was one in the valve train. Next step was the dizzy shaft but nothing. What could this ‘rounded’ (as opposed to a sharp) ticking be?
More listening and I think I had it but I needed better ears to confirm. Enter JBB.
‘Ears BB’ as he will be called in this updated, arrived with his lobes, of the ear sort.
“Stethoscope” he called as if I had turned into his engine bay nurse.
Stethoscope provided and there was darting, stopping and head shaking with a frown as he moved the probe around various attenuation points on the engine.
‘F&^%’ I think, head shaking and a frown can’t be good.
Stethoscope removed with the opinion,
“I can’t hear a difference, both side sounds the same.”
Well, that was good and bad news. If it is not the lifters then what?
I provided the LED light as Ears BB moved, hovered, stopped, shuffled and then darted around the engine bay.
“Seems to be coming from the back” (cylinder 7 area) he observed.
Yep, that was where I thought I heard it first before it started moving around the passenger side of the bay.
“What about a blown exhaust gasket” I offer
Ears BB then spots some soot on the head bolt under No 7 exhaust port. Yep, our ticking noise was actually a sharp chuffing from a blown exhaust gasket. Header removed and here is the proof:
It looks like the whole gasket was starting to separate.
Now, this should be a simple fix but… It turns out the PO had ported the heads to a dimension better suited to stormwater plumbing. In chev terms, these are pretty bloody big (47mm tall x 37mm wide)!
Lifters and gasket returned to the shop with the tale. They only had a gasket that was 40mm x 35mm. Off on a gasket hunt I go. I eventually found one that was slightly smaller but has the ‘lip’ around the inner rim.
New gasket installed with the assistance of permatex extreme temp sealant/gasket stuff (copper coloured). Left it for the advised period and then started it up. Ticking noise is gone!
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Jacko's Project
Good result Jacko..
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: Jacko's Project
Great result for everyone's effort at the All Holden Day. Coupe of the Day!
I was actually about to start the car to drive home when I heard my name over the public address. Little Ian came and found me to let me know. You never expect such things but they are a good public acknowledgement of the effort many people put in.
I was actually about to start the car to drive home when I heard my name over the public address. Little Ian came and found me to let me know. You never expect such things but they are a good public acknowledgement of the effort many people put in.
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Jacko's Project
Well done Jacko.
Not sure how much of an achievement it is though?
Best H*lden is kind of like having the best kind of AIDS isn't it?
Not sure how much of an achievement it is though?
Best H*lden is kind of like having the best kind of AIDS isn't it?
Last edited by hybrid on Mon Sep 24, 2018 6:01 am, edited 1 time in total.
Re: Jacko's Project
well done, good result for all your effort
Re: Jacko's Project
Can we settle on best kind of STD and call it even? AIDS assumes a certain mode of transmission that even a Holdon baulks at.hybrid wrote:Well done Jacko.
Best H*lden is kind of like having the best kind of AIDS isn't it?
Jacko
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Jacko's Project
Jeezus Jacko, I thought we'd seen the last of this Hold-on. Time for a new project methinks.. Nice score by the way. Please don't display it with your "Real" Trophies..
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: Jacko's Project
well done Jacko
Last edited by jbb on Mon Sep 24, 2018 11:30 am, edited 1 time in total.
Re: Jacko's Project
Great work Jacko. I would assume it is even harder to win a Holden trophy considering the quantity of opposition.
Re: Jacko's Project
Hi Nassi
Not really as most of the entrants were late model commodores with Walkinshaw/HSV valve covers and a dyno sheet adorning the engine bay. Apparently you must get these when you purchase the car ;-)
Jacko
Not really as most of the entrants were late model commodores with Walkinshaw/HSV valve covers and a dyno sheet adorning the engine bay. Apparently you must get these when you purchase the car ;-)
Jacko
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
Re: Jacko's Project
Well done Jacko, shows the effort and care you put in.