64 and a half
Moderator: Moderators
Re: 64 and a half
Whilst I haven't done much work on the car I thought I would throw up a update anyway.
I've been preparing the mods to the front steering at the moment.
I have machined the caster bars and extended the thread.
I've also made up some sleeves for the bushes/caster bar.
And made a camber adjustment kit as well and welded it in place. I just have to slot the hole to finish it.
Now I just need to find some more time!
I've been preparing the mods to the front steering at the moment.
I have machined the caster bars and extended the thread.
I've also made up some sleeves for the bushes/caster bar.
And made a camber adjustment kit as well and welded it in place. I just have to slot the hole to finish it.
Now I just need to find some more time!
-
- Mustang Star
- Posts: 537
- Joined: Thu Dec 16, 2010 11:04 pm
Re: 64 and a half
I bought a camber adjusting kit from the states, not worried about welding it in, just the filing out the slot is putting me off.
Re: 64 and a half
I'm going to use a die grinder with a carbide bur to do the slot.