Some might like the look. Reminds me of when Japanese manufacturers decided to "go muscle" though. The lines just dont work.
BODY/PAINT:
•1989 Notch w/ reproduction 1968 front and rear sheet metal blended in.
•Front and rear fascias are 100% steel. No fiberglass was used to blend in metal components.
•Front end features 7" Tri-Y halogen headlights, and 5" driving lamps in recess in lower grille.
•Rear end uses reproduction 1968 tail lights modified w/LED sequential turn signal light kit.
•Gas tank is custom fabricated, holds 16 gals, and fills through rear filler neck.
•Exhaust exits through fabricated, louvered tips out of lower valance.
•PPG base/clear 1969 Ford Candy Apple Red w/ hot rod black accents
•Custom mach1 stripe kit
ENGINE:
2002 4.6 2 Valve Modular engine. 65,000 miles.
Engine has following mods:
•CNC ported stage 2 Patriot Performance heads
•Patriot Performance Satge 1 cams
•Edelbrock Victor intake manifold
•Holley Avenger 600 CFM vacuum secondary carb
•Holley HP 125 electric fuel pump
•Flowtech 1"5/8 long tube headers, 2.25" full length exhaust
•MSD Engine management timing computer
•Jegs 2 row aluminum radiator w/ Derale Tornado cooling fan
•Estimated HP 325 WHP.
TRANSMISSION:
2002 Tremec Tr 3650 5 speed
•B&M Ripper shifter w/ Hurst pistol grip shift handle
•Centerforce Dual Friction clutch
•UPR Double hook aluminum quadrant, and firewall adjuster
•FRPP adjustable cable/HD fork
REAR END:
1989 8.8" HD rear end.
•New 28 spline axles
•Rebuilt Traction Loc differential
•New Motive 3.73 gears
•New Bearings and seals through out
SUSPENSION/STEERING:
•UPR Steel caster camber plates
•UPR Front coil over kit
•UPR 150 lb front springs
•Rebuilt lower control arms w/ new bushings and ball joints
•1995 spindles w/ new hubs
•Flaming River manual steering rack. Standard ratio (20:1) 3.5 turns lock to lock
•Flaming river solid steering shaft w/ DD universal joints.
•Full Length welded subframe connectors, w/ integral jacking rails welded to rockers
•Boxed rear upper and lower control arms w/ new Steeda poly bushings
•Strange Single adjustable Aluminum Coil overs w/ 12" 150 rear springs
BRAKES:
•Wilwood aluminum manual master Cylinder 7/8" bore
•Remanufactured 1995 Cobra dual piston calipers w/ new 13" rotors
•New 1995 Cobra rear calipers w/ new 11.65 rotors
•Wilwood adjustable proportioning valve
•Braided SS short lines on all 4 corners
INTERIOR:
•1989 "sport seat" front buckets w/ adjustable leg bolsters
•1965 mustang Deluxe door panel inserts
•Autometer "Cruiser" electric 6 gauge set in custom wood panel
•Seats recovered in TMI Mach 1 style upholstery
•ACC carpetYu
•Stinger foil backed sound deaden er covers entire floor and side quarter panels
•Interior vinyl dyed red to match red band in seat back.
•Panasonic sound system w/ Blue tooth and Sirius radio.
•10" subwoofer mounted behind passenger seat
•Vintage Air rear mount A/C system, mounted behind back seat blowing forward
WHEELS/TIRES:
•17 x 7 Centerline Billet fronts w/ Nitto 225 x 50 x 17 NT 450 fronts
•17 x 10 Centerline Billet rears w/ NIitto 275 x 50 x 17 NT 450 Rears
Suprised (what is a nice way of saying disapointed) that the engine puts out the figures that it does. No doubt the Fox is a light car but sitting under the bonnet - it looks like a wreckingball.
Have to say though; if i had the money pit. I'd be looking at something like this:
67 to Current model