Page 2 of 5
Re: 67 FG Resto Mod
Posted: Fri Dec 29, 2017 5:29 am
by Dwayne
I thought you only had half a Cuda, half rust holes.
Re: 67 FG Resto Mod
Posted: Tue Jan 02, 2018 4:37 am
by Roger
Got a little bit more done this weekend - even in the tropical weather conditions we have had here.
I tidied up the rails, removing the engine mounts and lower control arm mounts
I've checked the measurements, diagonals are good, from the datum line to left and right rail 2-3mm difference. Do you think this will be an issue.
Little bit more cutting to do before I can box the rails and install the TCI front end.
Re: 67 FG Resto Mod
Posted: Tue Jan 02, 2018 7:32 am
by ozbilt
2-3mm no problem
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 1:05 am
by Roger
Progress has been slow, still making some headway
Some pictures of the progress
Had to trim the flange off the chassis rails in prep for the new IFS
Welded up rails and prep with weld through primer
Removed the dash, cowls, firewall
Prep firewall
Firewall welded in
Firewall installed and a bit of primer put on.
Not a bad effort considering 38 outside temp, shed probably 48
Roger
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 4:04 am
by nassi
Bloody good effort mate. Best i can manage in that heat is a 6 pack.
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 4:34 am
by ozbilt
Talk to me about making the dash a bolt in.
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 4:58 am
by Dwayne
ozbilt wrote:Talk to me about making the dash a bolt in.
And the top of the radiator support panel too!!!!!
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 5:32 am
by Roger
Ozbilt, was looking to do this, but wasn't sure how. Will give you a call to discuss further.
Dwayne, I will talk to Ozbilt about this too.
These are "must do' jobs.
It's great going through this forum for all the great help and ideas you guys come up with.
Cheers
Roger
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 5:34 am
by Chux
awesome effort. Played golf (poorly) this morning and wilted in the heat here in Brisvegas. Got home and the lure of the A/C was too great - a nap and the cricket instead.
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 6:01 am
by Ausjacko
Nice work, enjoy seeing the progress.
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 7:12 pm
by Nuts
Another 67 Horror Story!! Just as well you have Dr Oz on your side! Talk to him often. Looking better!
Re: 67 FG Resto Mod
Posted: Mon Jan 15, 2018 10:47 pm
by ants
Roger wrote:
It's great going through this forum for all the great help and ideas you guys come up with.
Cheers
Roger
Couldn't agree more
I just wish this forum was around when I was doing mine, would have done a number of things differently.
Re: 67 FG Resto Mod
Posted: Tue Jan 16, 2018 7:50 am
by Ausjacko
Ants, can you PLEASE fast forward the avatar- suspense is killing me.
Nassi, I swear she moved the other night like you said.
Re: 67 FG Resto Mod
Posted: Tue Jan 16, 2018 10:42 am
by ants
https://youtu.be/gqA-LEcwkY4
Just for you Jacko...don't show anyone else
??
Re: 67 FG Resto Mod
Posted: Tue Jan 16, 2018 7:56 pm
by ozbilt