That old chestnut - steering conversion for RHD

Technical Discussion on Pre-1973 Mustangs

Moderator: Moderators

hybrid
Mustang King
Mustang King
Posts: 9354
Joined: Tue Jul 27, 2010 2:13 pm
Contact:

Re: That old chestnut - steering conversion for RHD

Post by hybrid »

Looks like it's KFFS-02

Image
Last edited by hybrid on Tue May 12, 2020 9:15 pm, edited 2 times in total.
Pinto-Pete
Mustang King
Mustang King
Posts: 3210
Joined: Fri Mar 04, 2011 7:57 pm

Re: That old chestnut - steering conversion for RHD

Post by Pinto-Pete »

Thanks hybrid.. :like:
I'm Batman...

Crane Operator
Mammoet Australia
Rye Park Wind Farm
Shaunp
Mustang King
Mustang King
Posts: 4443
Joined: Thu Jul 29, 2010 7:07 pm

Re: That old chestnut - steering conversion for RHD

Post by Shaunp »

springs depend on the year. 67 on normally use a Falcon 6 spring and a 65/66 a Cortina 6 spring. Standard height of a 66 would be the next spring up from a 59 and 67 would the next higher spring then a 0 which I think is an 01.
hybrid
Mustang King
Mustang King
Posts: 9354
Joined: Tue Jul 27, 2010 2:13 pm
Contact:

Re: That old chestnut - steering conversion for RHD

Post by hybrid »

That is a good point Shaun.
Mine has KFFL-01 in it and it's not really that low. Going up two sizes from there might be too much.
smh00n
Mustang Star
Mustang Star
Posts: 312
Joined: Fri Jan 23, 2015 2:03 pm
Location: Sydney Hills District

Re: That old chestnut - steering conversion for RHD

Post by smh00n »

I'll let you know in a week or two. I have -0 and -59 here to test
Post Reply