Acapulco blue project

Shaunp · Post by **Shaunp** » Thu Jul 18, 2013 7:42 pm

So I may just call them, and have chat, I'm running at Toploader with Australian Clevo bell-housing.

gotohellgadafi · Post by **gotohellgadafi** » Thu Jul 18, 2013 9:38 pm

OK, sorry about the delay......best to speak to Peter direct.
G, the ones hanging are display ones, he has a few in boxes.

The least I can do for you guys is show you photos of the clearances:

Hope that helps......

Shaunp · Post by **Shaunp** » Thu Jul 18, 2013 10:13 pm

Sweet going to order some tomorrow,

boofhead · Post by **boofhead** » Thu Jul 18, 2013 11:07 pm

Very nice fit and finish. I would use a set if I was not sorted already.

Nuts · Post by **Nuts** » Thu Jul 18, 2013 11:16 pm

Why is it that aussie header manufacturers weld the hedder plates to the pipes on the outside and the rest of the world welds them on the inside which makes it easier to get a wrench on the bolts.

soc123_au · Post by **soc123_au** » Fri Jul 19, 2013 1:35 pm

Shitloads of room. Gotta be happy with that.

Shaunp · Post by **Shaunp** » Fri Jul 19, 2013 6:34 pm

Ordered a set today as well as a Flow master 2.5" stainless American Thunder exhaust system with Super 44 boxes

boofhead · Post by **boofhead** » Fri Jul 19, 2013 7:06 pm

So all of it local? Sounds like it will be a nice setup. Looking forward to hearing it going - likely before mine is up and running.

Shaunp · Post by **Shaunp** » Fri Jul 19, 2013 7:32 pm

boofhead wrote:So all of it local? Sounds like it will be a nice setup. Looking forward to hearing it going - likely before mine is up and running.

Had to get the headers from Sydney mustang, they must have a deal with Hedman, no one lists them. The rest is from Summit, one more order to be delivered and I have all the engines bits, just waiting of all the ARP bolts, oil pump and. Also got a new Borgsen Saginor power steer pump and bracket.

boofhead · Post by **boofhead** » Fri Jul 19, 2013 10:02 pm

I know you do not need my help but I am happy to hang around when your building the engine. As you know I like building them..

I am also interested in your power steering choices - I need a pump so your feedback would be helpful. I am around, e.g Local, tomorrow building and mounting the air-con condenser. We can talk if you have the time. I can drop around.

Shaunp · Post by **Shaunp** » Sat Jul 20, 2013 9:28 am

Be around most of the day give me a call.

Shaunp · Post by **Shaunp** » Sat Jul 20, 2013 9:55 am

This the pump and bracket I ordered, says it works with factory AC bracket
https://www.summitracing.com/parts/brg-800330

boofhead · Post by **boofhead** » Sat Jul 20, 2013 10:21 am

Cool - I am interested. I looked up the instructions and (somehow) appears to work when air is used. That was my only concern so I am interested that's for sure.

I am going to the wreckers to look for Relay packs and other electrical items to build a relay board for my EFI setup + powering some accessories. After which I will call and if you around I will come over.

gotohellgadafi · Post by **gotohellgadafi** » Tue Jul 23, 2013 9:15 pm

I have assigned 'security' to stop the 'hi jackers':

gotohellgadafi · Post by **gotohellgadafi** » Tue Jul 23, 2013 9:38 pm

We've also hired a new apprentice:

Mustang Tech

Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project

Re: Acapulco blue project