On that EFI it should be a R&P pump unless the donor car had a box? If so, then it's the pump.scott66stang wrote:The pump must be putting out too much pressure surely, 2 in a row is a bit sus?
Very frustrating for you.
My 67 Convertible EFI Restomod project
Moderator: Moderators
Re: My 67 Convertible EFI Restomod project
Kerry
To our wives and sweethearts. May they never meet
To our wives and sweethearts. May they never meet
Re: My 67 Convertible EFI Restomod project
Yeah the pump is brand new, I replaced it when i put the new rack in. Its the original type pump for a 93 Ford V8, same pump that was on the mustangs of that era. From all accounts the pump should be fine pressure wise as its built for a rack system. I have got a heidts power steering valve here, thatll go in next. But at this stage my stang can go and get fucked.
Re: My 67 Convertible EFI Restomod project
Tim, don't be too hard on the Stang Buddy, she can't help it! She's American.. ![Wink2 ;)](./images/smilies/smiley2.gif)
![Wink2 ;)](./images/smilies/smiley2.gif)
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: My 67 Convertible EFI Restomod project
Im back, after a few health issues, im finally able to get to work in the shed. First order of business rip the RRS rack out and send it back for repair or replacement. I reckon this is the 500th time the racks been removed. My apprentice helped me get the stang on the hoist
![Image](http://i53.photobucket.com/albums/g74/TimR_2006/A0395E25_zps413e4c8b.jpg~original)
I picked up a couple of manual drag links and a steering box out of a 68 but I think Im going to try the RRS rack again with the Heidts pwr steering valve. The good folks at RRS tell me that a valve is not needed to lower the pump pressure but im putting it in, The Ford pump obviously has too much pressure for the rack. Hopefully I can get a new rack from RRS asap. Ive lined up a fella to fit the vert top for me, so I hope I can start moving in the right direction and get this on the road.
![Image](http://i53.photobucket.com/albums/g74/TimR_2006/A0395E25_zps413e4c8b.jpg~original)
I picked up a couple of manual drag links and a steering box out of a 68 but I think Im going to try the RRS rack again with the Heidts pwr steering valve. The good folks at RRS tell me that a valve is not needed to lower the pump pressure but im putting it in, The Ford pump obviously has too much pressure for the rack. Hopefully I can get a new rack from RRS asap. Ive lined up a fella to fit the vert top for me, so I hope I can start moving in the right direction and get this on the road.
Re: My 67 Convertible EFI Restomod project
Glad to hear you're back at it Tim.
My Motto - Don't get Caught! If you do, Blame Someone Else!
MUSTANG - Fantastic Not Plastic
MUSTANG - Fantastic Not Plastic
Re: My 67 Convertible EFI Restomod project
Tim, that's great news.
cheers
jon
cheers
jon