Page 16 of 17
Re: Time to start my rebuild project
Posted: Wed May 06, 2020 9:40 am
by Pinto-Pete
Thanks mate will have a look..
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 5:26 am
by LEEH69
so to be a little different, and because I can...hehehehe
meant to be a little secret so you guys have to promise not to tell.....hhaahahaha
https://youtu.be/ynHxGZ-vD1I
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 6:00 am
by Dwayne
It says the video is private.
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 6:30 am
by LEEH69
oops! sorry, think I've sorted it, didn't know of any other way to post a video
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 7:06 am
by smh00n
FCKN cool that is
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 7:12 am
by Dwayne
That's awesome, great thinking!
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 7:38 am
by Pinto-Pete
To cool for school that...
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 9:25 am
by ants
Very tricky bit of kit.
But the other video of the engine running is just AWSOME!!!
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 5:44 pm
by nassi
You never cease to amaze.
Re: Time to start my rebuild project
Posted: Thu May 07, 2020 8:21 pm
by hybrid
haha Nice one
Re: Time to start my rebuild project
Posted: Fri May 08, 2020 4:05 am
by ozbilt
Mrsozbilt and I love it. Well done Lee.
Re: Time to start my rebuild project
Posted: Fri May 08, 2020 6:58 am
by LEEH69
Thanks all, ants, we're going back on the Dyno pretty soon to finish the tune so I'll put that up when we do..
Re: Time to start my rebuild project
Posted: Fri May 08, 2020 7:53 pm
by Ausjacko
Yep, that takes the 'Cool' for a while. Very nice.
Shit, just showed H and now she wants one...
Have not forgotten about the wheel.. Waiting on Matt for the pics.
Cheers
Jacko
Re: Time to start my rebuild project
Posted: Sat May 09, 2020 6:45 am
by LEEH69
No worries Jacko, do you have a brand name or website to look for maybe?
Re: Time to start my rebuild project
Posted: Tue Jun 16, 2020 7:19 am
by LEEH69
so a little update, now at a friends Dyno shop finishing the tune on the engine, so before balancing all eight throttle bodies did a couple of runs just to see where we are and where we are going, had a pleasant surprise,
and she didn't want to stay on the Dyno, strapped her down a little tighter and got wheel spin on the rollers, and at this stage was showing 690 ft lbs of torque.....since then spent two nights adjusting and balancing the throttle bodies, went back on the Dyno.....and then Rattle Rattle Rattle....and after investigating, found we had a seized Hydraulic lifter....the problem child never seem to get much luck. so now back in the rebuild stage to get back on the Dyno next week...well here's hoping
https://youtu.be/fQKP3iEd8xU
https://youtu.be/r9gBbxqE23Y
