American Autowire Harness

[hybrid]

What are the EZ wiring kits like?

[Nuts]

I used an EZ kit and it has 11 circuits but no connectors. You need to use your own connectors. One this I found odd was the lack of ignition on fused circuits. I think there was only one.

[cage]

Alright guys, as promised see description and photo's below of the Painless Wire Harness Part# 20121 for 67/68 mustang.

Main Parts Included:
- 14 circuit wiring harness, fully labelled such as 'rear light section', 'interior lighting section', 'gauge cluster section' etc etc. Everything seems to be terminated
- Full terminated fuse block including pre wired fuses and relays installed
- Pig tails such as 'headlight connector harness', 'A/C harness, 'tail ground harness' etc etc
- Firewall grommets, ignition switch, ballast resistor, maxi fuse, nylon ties if you need them
- parts box containing extra terminals, splices etc
- about 10 light bulbs
They even threw in a hat.

Pictures below

[shane427]

Hmmm...

Thanks for the pics Cage. looks good.

Does it include all plugs to go straight onto all the factory acessories, light switch etc?

Might go this route to save a bucket of time and so I don't get stuck with the issues Kerry noted. Could easily splice in some new plugs and extra wire in place of the firewall plugs for custom routing...