Just to repost on the front fenders for all those that could not understand my near sightedness .....
Fronts done .....
Before wiring, but arch reshaped ....
Marking out the change to the arch .....
The wired edge is as I posted on the REAR quarter panels .......
Answering the question as to how I joined the quarter arch to the outer rear wheel house.
I cut the flange off the outer wheel house & glue the quarter to the outer wheel house. Another way is NOT to wire them, but cut the flange off the outer wheel house & glue the quarter panel while folding the edge up into the wheel house (similar to a door skin) ......
Flange cut off & urethane primer applied .....
Quarter panel cleco'd & clamped in place after urethane applied around arch & a couple of other areas ......
Flange edge of quarter panel hammered up (like a door skin) onto the outer wheel house. The urethane is not only a glue, but also a sealer ....
No edges for the tire to catch on (easy to wash too ....
![Laughing :lol:](./images/smilies/icon_lol.gif)
) .....
![Image](http://i728.photobucket.com/albums/ww284/Downresto/67%20Mustang%20fastback%20C%20code/DSCN4011_zpsb969ce36.jpg~original)