Astro's GG-0351 coupe build.

[ozbilt]

Is it Ididit or Theystuffedit ?

[Shaunp]

If it becomes an issue I'll fix the original one to suit the Borgeson.

[ozbilt]

If it becomes an issue I'll fix the original one to suit the Borgeson.

[hybrid]

Looking great Astro

[Shaunp]

Got the drivers seat now, Astro maybe ok with where the wheel is, I'd like it a bit closer to the dash, I keep smacking knee on it as the top part of the col its much bigger than a factory one due to the tilt mechanism .

[ozbilt]

Got the drivers seat now, Astro maybe ok with where the wheel is, I'd like it a bit closer to the dash, I keep smacking knee on it as the top part of the col its much bigger than a factory one due to the tilt mechanism .

Also because it is GM based ........

[Shaunp]

Got the drivers seat now, Astro maybe ok with where the wheel is, I'd like it a bit closer to the dash, I keep smacking knee on it as the top part of the col its much bigger than a factory one due to the tilt mechanism .

Also because it is GM based ........

The driving position is much different to how I set mine up when we converted it, my wheel is closer to the dash and higher from the floor, not much but makes a difference.

[Astro]

I'll more than likely put a 13" wheel on it down the track.

Need some room to squeeze my beer belly in

Cheers

J

[Pinto-Pete]

You'll need a really deep dished wheel as well jr.....

[Astro]

Can I borrow one of yours?

[rkmiller73]

Like the seats!

[Shaunp]

John post the pic I sent with both seats in,

[Astro]

[Pinto-Pete]

That seating position will suit your short financier arms johnny.........

[Dwayne]