Will this damn torque converter come off???
Moderator: Moderators
Will this damn torque converter come off???
What a night, I finally got the engine out of my 66 mustang. That being the 289 engine, and was just about to put the thing on my engine stand when I realised that the damn torque converter is still on. How do I remove it?
Tristan
Tristan
Re: Will this damn torque converter come off???
3-4 bolts/nuts (model dependant) on the front side of the flex plate. Hold it in place by hand when removing the last one lest it falls off.
If you have got that bit done and its still stuck..............
Lower the engine onto the floor, make like a woman.....put the donk between your legs.... put your feet against the engine mounts as a brace, grab the torque converter and wiggle wiggle. Move your hand positions around and keep wiggling. The more you wiggle, the sooner it will come.
Good luck.
Jas
If you have got that bit done and its still stuck..............
Lower the engine onto the floor, make like a woman.....put the donk between your legs.... put your feet against the engine mounts as a brace, grab the torque converter and wiggle wiggle. Move your hand positions around and keep wiggling. The more you wiggle, the sooner it will come.
Good luck.
Jas
Jason Pigdon
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Re: Will this damn torque converter come off???
thanks mate, the only issue i have is, the torque converter wont turn, i can see one bolt, but the bolt is rounded. the other 3 bolts look the same, but i cant even get to them because of it not spinning
66 c-code mustang coupe
289ci engine
289ci engine
Re: Will this damn torque converter come off???
pull all the spark plugs out to start with. The compression of the engine is probably holding it from turning freely
If your harmonic balancer is still on, use a socket on the bolt to turn the engine into place where you can undo the bolts.
If your getting a new converter, cut the nuts off. If your keeping it and the nuts are rounded, use a socket thats old thats the next size down. Hit it hard over the rounded nut so it cuts into the rounded nut edges.
You may only get one off before the socket gives out but may get all 3/4
You could also heat them up with an oxy prior using the socket
A good set of multi grips may work also but those things never do what you want them to do
Makes ya wonder who the hell tightened them up so tight that all of em are rounded
If your harmonic balancer is still on, use a socket on the bolt to turn the engine into place where you can undo the bolts.
If your getting a new converter, cut the nuts off. If your keeping it and the nuts are rounded, use a socket thats old thats the next size down. Hit it hard over the rounded nut so it cuts into the rounded nut edges.
You may only get one off before the socket gives out but may get all 3/4
You could also heat them up with an oxy prior using the socket
A good set of multi grips may work also but those things never do what you want them to do
Makes ya wonder who the hell tightened them up so tight that all of em are rounded
Re: Will this damn torque converter come off???
jas24zzk wrote:
If you have got that bit done and its still stuck..............
Lower the engine onto the floor, make like a woman.....put the donk between your legs.... put your feet against the engine mounts as a brace, grab the torque converter and wiggle wiggle. Move your hand positions around and keep wiggling. The more you wiggle, the sooner it will come.
Good luck.
Jas
Smooth.
Re: Will this damn torque converter come off???
:rotfl:
(PRAYER) Oh thank you Wild Turkey American Honey & Cola in those small thin bottles, for giving me the strength to act like a half wit, and say stupid things at inappropriate times, semi-anonymously, on a public forum.
Amen.
Amen.
Re: Will this damn torque converter come off???
jas was on the beers again last night one thinks
Cheers,
j
j
Re: Will this damn torque converter come off???
ps.....get your misses to help and!!!!!
:rotfl:
:rotfl:
Cheers,
j
j
Re: Will this damn torque converter come off???
Well lets see?? It was friday evening... D(a)ero Bar time... $5 all you can eat pizza and $2 CL(r)OWNIESjusTANG wrote:
jas was on the beers again last night one thinks
Jason Pigdon
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Re: Will this damn torque converter come off???
On a serious note,
if the nuts are rounded off, roll it round until you can poke a die grinder in the starter hole to grind 2 flats into the nut, that will give the vice grips a little more hope.
Cheers
Jas
if the nuts are rounded off, roll it round until you can poke a die grinder in the starter hole to grind 2 flats into the nut, that will give the vice grips a little more hope.
Cheers
Jas
Jason Pigdon
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Pigdon Automotive Services
Historic Smash Specialists
3/1 Burgess Road, Bayswater Nth, Vic.
(03) 9761-4801
PS: Forgive me for I was jilted by peterp
Re: Will this damn torque converter come off???
glad u were i was on a plane some place over NSWjas24zzk wrote:Well lets see?? It was friday evening... D(a)ero Bar time... $5 all you can eat pizza and $2 CL(r)OWNIESjusTANG wrote:
jas was on the beers again last night one thinks
a worthwhile learning experience trip although
Cheers,
j
j
Re: Will this damn torque converter come off???
platypii convention ??
(PRAYER) Oh thank you Wild Turkey American Honey & Cola in those small thin bottles, for giving me the strength to act like a half wit, and say stupid things at inappropriate times, semi-anonymously, on a public forum.
Amen.
Amen.
Re: Will this damn torque converter come off???
:rotfl:donoauto wrote:platypii convention ??
Re: Will this damn torque converter come off???
donoauto wrote:platypii convention ??
something like that..... the pus needs his toy's to you know
Cheers,
j
j