Mustang Tech

You should at least read these topics & most of the others in the Tech Shop (Right hand side of the page on this forum), so you understand more about the cars you may buy.......

http://www.mustangtech.com.au/Content/p ... cid=3.html

Thanks Kerry,

Do you have a higher res image of the 68 dimensions (67 / 68 measurements)

mikes68 wrote:
Do you have a higher res image of the 68 dimensions (67 / 68 measurements)

I did not post that one. I think the next under frame chart was the 69 chart. which would be almost identical to what the 68 was.

Maybe moe can link it.... ?.....

Here's a good res image for a 70 if you want to shove that one up there...

Thanks Mike, will do tomorrow.