What to use in a Parts Cleaner?

Need help on paint, paint prep, welding, engines etc?

Moderator: Moderators

Post Reply
tim_morrison82
Mustang Maniac
Mustang Maniac
Posts: 1369
Joined: Wed Jul 28, 2010 2:16 pm

What to use in a Parts Cleaner?

Post by tim_morrison82 »

Hi Guys,

what solvent/degreaser should i use in a parts cleaner?

picked one up the other day, smells like they used fuel. just wondering what will do the best job.

do you drain it at the end of every use? i never had one back on the farm. everything was done with fuel by hand. i think i need some help getting through all these parts.

It was on the farm where i learnt polystyrene + fuel =
Dreaming the dream... Living the reality...
hybrid
Mustang King
Mustang King
Posts: 9354
Joined: Tue Jul 27, 2010 2:13 pm
Contact:

Re: What to use in a Parts Cleaner?

Post by hybrid »

I have used Kerosene in mine. But you can also buy 20L drums of the proper stuff which is meant to be safer than kerosene (more resistant to ignition) which is what I use now. Something like this:
http://www.ebay.com.au/itm/PARTS-WASH-C ... SwwE5WZQ-a

I wouldn't use fuel (gasoline) in one because of the electric motor in it. Unless you like setting yourself on fire.
There is no need to drain it each time if it has a lid on it. Just close it.
Last edited by hybrid on Mon Feb 01, 2016 4:03 am, edited 3 times in total.
xpconnor
Mustang Maniac
Mustang Maniac
Posts: 1665
Joined: Wed Jul 28, 2010 10:09 am
Contact:

Re: What to use in a Parts Cleaner?

Post by xpconnor »

I started looking into this a couple of years ago but never ended up making a decision as I didn't end up buying a parts cleaner. FWIW I do remember reading online that some of the new environmentally friendly cleaners where crap especially if you don't have the ability to heat them up.
"The Mustang is full of Awesome"
Ausjacko
Mustang King
Mustang King
Posts: 2367
Joined: Tue Aug 03, 2010 7:30 pm
Contact:

Re: What to use in a Parts Cleaner?

Post by Ausjacko »

kero gets my vote
'68 J-code GT Fastback
'67 S-code GT coupe, 'Pink Bitz' formerly known as 'Hookin' up a brother'
'69 M_____ GTS Fastback 'Blasted'
66STNG
Mustang Star
Mustang Star
Posts: 670
Joined: Wed Aug 07, 2013 1:07 pm

Re: What to use in a Parts Cleaner?

Post by 66STNG »

I use a mixture of diesel,kero and detergent, works well in my parts washer.. Just my two bobs..
66 basket case
Nuts
Mustang King
Mustang King
Posts: 4635
Joined: Sat Jul 31, 2010 6:07 pm

Re: What to use in a Parts Cleaner?

Post by Nuts »

I use kero for everything except auto transmissions for which I use ULP. And I threw the pump away years ago as it was useless!
Last edited by Nuts on Mon Feb 01, 2016 5:06 am, edited 1 time in total.
My Motto - Don't get Caught! If you do, Blame Someone Else!

MUSTANG - Fantastic Not Plastic
scott66stang
Mustang King
Mustang King
Posts: 4716
Joined: Wed Jul 28, 2010 6:15 am

Re: What to use in a Parts Cleaner?

Post by scott66stang »

well they take about 40-60l litres from memory. I used about 30-40L kero to 10 L degreaser this allows enough degreaser to wash of with water after. I have used a few green degreasers they are all shit for a parts washer.
Last edited by scott66stang on Mon Feb 01, 2016 6:20 am, edited 1 time in total.
lukep6470
Mustang Star
Mustang Star
Posts: 600
Joined: Mon Jan 06, 2014 9:13 pm

Re: What to use in a Parts Cleaner?

Post by lukep6470 »

hydrofluoric acid?

Just ask Walter White
CobraJet
Junior Mustang
Junior Mustang
Posts: 53
Joined: Fri Nov 23, 2012 10:18 pm

Re: What to use in a Parts Cleaner?

Post by CobraJet »

If its a late model parts washer be careful, they have plastic inside the pumps and cannot use hydrocarbons like petrol etc.

I have new one that only uses water based cleaners. I use a mix of simple green and water and it works fine, even for old grease and much. Filter it out, drain off the oil and reuse.
I'm here for Pinto Pete's avatars!
Pinto-Pete
Mustang King
Mustang King
Posts: 3210
Joined: Fri Mar 04, 2011 7:57 pm

Re: What to use in a Parts Cleaner?

Post by Pinto-Pete »

Made my own works a treat, diesel and kero wash..
I'm Batman...

Crane Operator
Mammoet Australia
Rye Park Wind Farm
Post Reply