Need some advise,
Installing the front suspension.
1. Torque settings of bottom control arm.
2. Ball joint torque settings.
3. Size of the sway bar required,
.
66 coupe, 302 Auto..
Thanks..
Sway bar
Moderator: Moderators
Re: Sway bar
Tight is the torque setting,
no bigger then 24mm is the bar size. make sure you brace the front end as even a 24mm will flex a 65, did you put torque boxes in it?
no bigger then 24mm is the bar size. make sure you brace the front end as even a 24mm will flex a 65, did you put torque boxes in it?
Re: Sway bar
torque boxes are installed..
The car had a 21mm in when I got it, is that too small.
No torque settings for either bolts, or ball joints?
The car had a 21mm in when I got it, is that too small.
No torque settings for either bolts, or ball joints?
66 basket case
Re: Sway bar
Stay with the 21 mm bar. It is larger than stock while not placing to much load on the frame. It is easy to change if you need to or want to in the future.
I will someday think of something clever to say.