rear wheel bearings
Moderator: Moderators
rear wheel bearings
in the next week im sending my center off to be done so while its away I will do my wheel bearings can anyone tell me what bearings will fit a lsd 9 inch 28 spline axle as ive heard there is 2 sizes
Last edited by 123abc on Mon Jul 16, 2018 7:24 am, edited 1 time in total.
Re: rear wheel bearings
Hmm,
There is big and small bearing housings. The small bearing 9" is the same size as the 8" if that helps. I know in the 67 the 28 spline 9" was a small bearing housing.
Maybe this will help:
http://boyerfour.com/mustang/rear/small ... rd_8_9.htm
There is big and small bearing housings. The small bearing 9" is the same size as the 8" if that helps. I know in the 67 the 28 spline 9" was a small bearing housing.
Maybe this will help:
http://boyerfour.com/mustang/rear/small ... rd_8_9.htm
Re: rear wheel bearings
If it's a factory differential it will have a small bearing housing.
Bolt top to bottom are 2"s apart and 3-3/8" side to side. Can't think of a Stang that I have come across with factory big bearing ends. From memory the big bearing end guys go to 31+ spline axles.
Charbel
Bolt top to bottom are 2"s apart and 3-3/8" side to side. Can't think of a Stang that I have come across with factory big bearing ends. From memory the big bearing end guys go to 31+ spline axles.
Charbel
C&M Engineering