Page 1 of 1
Brake pipe flaring tool recommendations to buy
Posted: Sun Aug 12, 2018 8:14 pm
by smh00n
Decent tool that works, will last.
Re: Brake pipe flaring tool recommendations to buy
Posted: Sun Aug 12, 2018 8:46 pm
by nassi
This is the style of tool I have been using for 15 years.
https://www.ebay.com.au/itm/Trade-Grade ... 0506.m3226
Re: Brake pipe flaring tool recommendations to buy
Posted: Sun Aug 12, 2018 10:24 pm
by Shaunp
Yep the one Nassi suggest is a good tool.
Re: Brake pipe flaring tool recommendations to buy
Posted: Mon Aug 13, 2018 4:20 am
by Charbel
You can also buy a 37* flare attachement for that style of tool which is good for AN flares
Re: Brake pipe flaring tool recommendations to buy
Posted: Fri Aug 17, 2018 6:02 am
by smh00n
Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
Re: Brake pipe flaring tool recommendations to buy
Posted: Fri Aug 17, 2018 7:28 am
by nassi
smh00n wrote:Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
It will work fine, just make sure the cut is square.
Re: Brake pipe flaring tool recommendations to buy
Posted: Sat Aug 18, 2018 12:38 am
by Shaunp
nassi wrote:smh00n wrote:Bought that one, looks OK. Even came with a test flare in one of the dies. See how it works this weekend
It will work fine, just make sure the cut is square.
And dont have the pipe in the collet too tight, let stick out then use the flat tool on the rotary bit to push it back the tighten the collets up, then flare it.
Re: Brake pipe flaring tool recommendations to buy
Posted: Sat Aug 18, 2018 4:20 am
by smh00n
Roger that x 2