I drew up the convertible plate I made so that others can have it cut on a water jet or just make it by hand as I did. I can pm you the dxf and dwg file if you want.
65 66 Convertible plate drawing
Moderator: Moderators
65 66 Convertible plate drawing
Checkout my car builds - edzv8s.com
66 Convertible Bench Seat AODE 3.5 9"
66 Convertible Bench Seat AODE 3.5 9"
Re: 65 66 Convertible plate drawing
Thanks for that.
Re: 65 66 Convertible plate drawing
What is a convertible plate?
Re: 65 66 Convertible plate drawing
It joins the lower seat pans together on convertibles.
Re: 65 66 Convertible plate drawing
Here's 2 more that people have made, I also welded a tailshaft loop to mine 100 mm from the front for Summernats. I figured while I had measured mine I would pass on the dimensions to save others the trouble of working it out if theirs was missing or they had to make a different shape one.
Checkout my car builds - edzv8s.com
66 Convertible Bench Seat AODE 3.5 9"
66 Convertible Bench Seat AODE 3.5 9"