Page 1 of 1

Coolant for 65 mustang

Posted: Wed Mar 03, 2021 4:50 am
by ACTstanglover
Hi, any idea how many litres of coolant I need for a standard 289 Mustang with standard radiator. I think I drained about 7 litres but can’t be sure.

Thoughts?

Thanks

Andrew

Re: Coolant for 65 mustang

Posted: Thu Mar 11, 2021 2:46 am
by jusTANG
Closer to 12 to 15lts completely empty. You will have some coolant in the engine etc still.

Re: Coolant for 65 mustang

Posted: Wed Mar 24, 2021 1:44 am
by Edz66Vert
I run straight water with corrosion inhibitor because that's what the Natrad boss said. He said straight water has the best coolant properties, just needs anti-corrosion to protect the various metals in the motor.

Re: Coolant for 65 mustang

Posted: Thu Mar 25, 2021 7:44 am
by mungus
Edz66Vert wrote:I run straight water with corrosion inhibitor because that's what the Natrad boss said. He said straight water has the best coolant properties, just needs anti-corrosion to protect the various metals in the motor.
Unless you live in Canberra, I'd say he's spot on. From a thermodynamics view its impossible to find any liquid with better heat absorption properties than good old water. Just that in combination with heat and some air bubbles it makes stuff rust! So some anti corrosion additive is really all you need unless you are in a genuinely cold part of OZ that gets regular heavy frosts. That is unless you like swapping out welch plugs!

Re: Coolant for 65 mustang

Posted: Sun Mar 28, 2021 8:29 am
by Edz66Vert
mungus wrote:
Edz66Vert wrote:I run straight water with corrosion inhibitor because that's what the Natrad boss said. He said straight water has the best coolant properties, just needs anti-corrosion to protect the various metals in the motor.
Unless you live in Canberra, I'd say he's spot on. From a thermodynamics view its impossible to find any liquid with better heat absorption properties than good old water. Just that in combination with heat and some air bubbles it makes stuff rust! So some anti corrosion additive is really all you need unless you are in a genuinely cold part of OZ that gets regular heavy frosts. That is unless you like swapping out welch plugs!
Funny you say that mungus, I do live in Canberra - The Nations, great Capital!

I said that to the boss of Natrad Phillip that I thought it would be too cold for that in Canberra and he argued the engine block in Canberra does not freeze. He said he only runs anti-corrosion inhibitor and water in his 4wd which is parked outside in winter and he's never had it freeze up. I have checked this last winter as I have a digital temp gauge on my 4wd and it has never been colder that 12 degrees in winter at 8 am. I have the well advertised 'Engine gaurd' on my car as extra protection so I will keep an eye on the Mustang, but it lives in the garage.

The only person I have heard of who froze his motor (and actually cracked his block, rather than popping any welsh plugs out) was a Ford V8 guy in Cooma - it gets cold there. Mr Natrad said if you park overnight at the snow, you would want ant-freeze in the engine.

Re: Coolant for 65 mustang

Posted: Mon Mar 29, 2021 3:38 am
by Pinto-Pete
jusTANG wrote:Closer to 12 to 15lts completely empty. You will have some coolant in the engine etc still.
Where's ya note j..... :impatient: